Last updated: 11/24/2009

Arthroscopic surgery is performed most commonly on the knees, and also on ankles, shoulders, wrists, elbows, and hips. Knee joints are large enough to allow free movement of arthroscopic instruments and therefore are ideal for the benefits of this type of examination and treatment. The technique is valued because it allows surgeons to see inside the joint through incisions as tiny as a quarter of an inch (about 1 cm) rather than the large incisions that open surgery procedures require. The accuracy of arthroscopy is said to be 100% for diagnosis compared to diagnostic imaging such as MRI. Arthroscopic surgery may be used to relieve mechanical joint problems, such as buckling, stiffness, or locking, and can preclude or delay the need for more aggressive surgery such as a joint replacement.

In arthroscopic surgery, an orthopedic surgeon uses a pencil-sized arthroscope—a fiber-optic instrument fitted with a lens, a light source, and a miniature video camera—to see inside a joint. Advanced fiber optics allow even more detail to be seen than in open surgery, often identifying problems that may have been difficult to diagnose with other methods. The arthroscope transmits highlighted images of the structures to a television monitor in the operating room. The surgeon is able to view the entire examination, getting a full view of the joint, its cartilage, and surrounding tissue. The type and extent of the injury can be determined and repair or correction can be performed if necessary. Some of the most common joint problems diagnosed and treated with arthroscopic surgery are:

• synovitis (inflamed joint lining) of the knee, shoulder, elbow, wrist, or ankle
• injuries to the shoulder, such as rotator cuff tendon tears, impingement syndrome, and dislocations
• injuries to the knee, such as meniscal (cartilage) tears, wearing down of or injury to the cartilage cushion, and anterior cruciate ligament tears with instability
• injuries to the wrist, such as carpal tunnel syndrome
• loose bodies of bone and/or cartilage in the knee, shoulder, elbow, ankle, or wrist
• joint damage caused by rheumatoid arthritis or osteoarthritis

Arthroscopic procedures are performed in a hospital or outpatient surgical facility by an orthopedic surgeon. The type of anesthesia used (local, spinal, or general) varies, as does the length of the procedure; both depend on the joint that will be operated on, the type and extent of the suspected joint injury, and/or the complexity of the anticipated repair. Arthroscopic surgery rarely takes more than an hour. Most patients who have arthroscopic surgery, whether diagnostic or corrective, are discharged within the same day; some patients, depending on the complexity of the surgery or their post-operative condition, may stay in the hospital one or two days.

Considered the most important orthopedic development in the twentieth century, arthroscopic surgery is widely used. The American Association of Orthopedic Surgeons reports that it is performed by 80% of all orthopedic surgeons. The use of arthroscopic surgery on famous athletes has been well publicized. Although arthroscopic surgery was initially only a diagnostic tool used prior to open surgery, the availability of better instruments and techniques has encouraged its use to actually treat a variety of joint problems, often avoiding more complicated surgeries with longer recovery times. New techniques under development are likely to lead to other joints being treated with arthroscopic surgery in the future. Laser technology has been introduced as a treatment option in arthroscopic surgery and other advanced technologies are being explored.

Surgical procedure

After making two small incisions about the size of a buttonhole in the skin near the joint, the surgeon injects sterile sodium chloride solution through one incision into the joint to expand it for better viewing and movement of the instruments. The surgeon will also use this access to irrigate (flood with fluid) the joint area during surgery and to suction blood and debris away from the joint. This irrigation, or "washing" part of the procedure, is believed to be of value in itself, improving joint function. The arthroscope is then inserted into the second incision. While looking at the interior of the joint on the television monitor, the surgeon can determine the extent or type of injury and, if necessary, take a biopsy specimen or repair or treat the problem. A third tiny incision may be made in order to see other parts of the joint or to insert additional instruments, such as laser or tiny scalpels, when repairs or corrections need to be made. Arthroscopic surgery can be used to remove floating bits of cartilage, to debride (clean by removing tissue or bone), and to treat minor tears and other disorders. When the procedure is finished, the arthroscope is removed and the joint is once again irrigated. The site of the incision is dressed with compression bandages (ace bandages).